Garage Sale End Tables

I found two of these tables at a garage sale this summer for a sweet little price.  They were a little damaged but were solid wood and had great construction. 

 

I removed those weirdy side handles and filled the holes.  Sanded these babies down and painted them a beautiful gray.  I got to use my new paint sprayer for these pieces. I couldn't stop there and decided they needed a glaze. The glaze helped bring out the curves in the legs.  The drawer pulls were spray painted with an oil rubbed bronze.

 

They turned out great, but if I don't have a place for them...they get sold.  Off to craigslist land they went.  Someday I hope to have a little booth that I can put items like this for sale in, instead of cheapening the price for craigslist.

THE Rocking Chair...Part 2

Before you read further, check out how this rocking chair became mine.  Then, go read part 1.

Okay, now let's get serious. The seat of the chair is a basic box and it was quite easy to cover.  Then I covered the back of the chair with a dyed canvas drop cloth. Like most upholstering, the staples were showing when I was done.  I chose not to use welting, but created something a little flatter and less obvious.

I used the matching canvas with a strip of felt inside for some body.

 

After I ironed the pieces, it was time to glue them.  I used a permanent fabric glue for this.

 

The next photo is the finished product before it was glued to the chair.

 

I simply glued this strip over the staples.  Here's a closeup.

You ready for the finished product?!  Remember what I started with.

Here she is! 

I love how it turned out.  The binding looks really nice on it.  I think a traditional welting would have been too bulky. It lays nice and flat against the canvas. 

This was my first big upholstery project.  It should have been done a long time ago.  But it's done now.  I don't think I can ever get rid of this rocking chair.  I owe my neighbor a huge THANK YOU!

THE Rocking Chair..Part 1

The easy part of any upholstery project is taking off the old fabric.  When I got this rocking chair from the neighbor, it didn't take me long to remove the fabric.  It's always exciting to see what is beneath everything.  There was NOTHING exciting about the upholstery underneath.  Here's what I started with.

 

I started peeling off the layers on the seat.   First was this lovely sunflower number.

Then there were stripes that reminded me of OU.  GROSS! I would have covered that too!

 

Then there was THIS!  What is this? And it was stained...ick!

 

Once I had it down to the bare bones I started gluing and clamping.  Someone originally glued this chair with hot glue.  Hot glue DOES NOT keep joints in tact.  Jot that down!  The chair also had no backing in it.  I didn't take a picture, but there was a PILLOW, yes a pillow in the center. 

I didn't take a picture of the jute webbing that I used for the backing.  I laid the webbing out like a lattice pie, then stapled it in as tight as I could.  I HIGHLY recommend using an electric stapler.  The jute webbing looked like this.

Source

Here is the chair after the jute webbing was put it. I covered the webbing with batting.

After this step I covered the batting with felt.  I liked using the felt because it gave it a smooth finish that wouldn't stretch out. I know it seems like a lot of steps and I'm no professional, but this was the While He Studies way.  At this point the chair was ready for the fabric. 

I didn't want a fancy printed fabric.  This chair is old, I loved the mission oak look of it and didn't want to distract from it's classic lines.  I chose to use a canvas drop cloth that had taken a bath in coffee.  Yes, COFFEE!  It's not just for drinking anymore.

You could also use strong brewed tea.  I let this soak for several hours, then laundered it.  It did darken it just a bit.  Next time I'd let it dry, then launder it.  Check back tomorrow for the finished chair!

Free Furniture From the Neighbor

My husband and I have always loved antiques. Soon after we moved into our house we noticed that our neighbor had a beautiful rocking chair tucked away in her garage. It was always admired by us and my husband even suggested that he go and ask our neighbor about it. I never would let him because I would be disgusted if someone came and asked me about something in our garage. Fast forward two years.

This summer I had just gotten home from work and our neighbor wanted to ask me a question. So, I went over. She told me that she had noticed I was working on some chairs lately and asked if I wanted another one.

She had this great little bend wood chair that she didn't need.

Upon inspection, it was stamped "Property of the United States Army." After more inspection and research, this was made by the High Point Bending and Chair Company in North Carolina. It changed names in 1956, so this chair is pre-1956.

Then I couldn't believe it. She said she had a rocking chair that was just sitting in her garage and needed work. I was SO excited...it was THE rocking chair we had been eyeing. She told me I could HAVE it...FREE! I was thrilled. It came from the original Adams Hotel in Tulsa, OK. Her friend sold it to her under the condition that if she ever sold it, that the new owner would also know the history.

Needless to say I was so excited to run inside and tell my husband. While it needs some work and an upholstery job, look at this BEAUTY!

Door Jamb Jam

Painting all of the trim in our house has also caused me to paint the doors as well.  Of course, things never go back on as easily as they came off.  After I hung the door in our spare bedroom it wouldn't stay closed.  After several attempts at loosening, straightenting, and tightening the hinges (x23) I was frustrated. Then I realized that it wasn't the hinges, it was the strike plate. Here's a little trick for moving the strike plate from a previous position.

First dip several toothpicks in wood glue and stuff in the hole that you are trying to fill. It should be a very snug fit.  It's okay if they don't fit in there evenly.

Let it dry for 24 hours.  Then simply snap off the toothpicks at the base.

This leaves a very rough edge.  Use a chisel to level the toothpick flush with the door jamb. If your chisel is sharp you should be able to take care of it in one blow.

Now it's time to put the strike plate back on.  I chose to tape the strike plate in place so I knew it would not move while I was putting the new screws in.

This worked like a charm and the door closed perfectly.

Updated Ceiling Fan on the Cheap

One of the very first projects I worked on when we moved into our home was updating a few of the ceiling fans.  There wasn't a thing wrong with them except, well...THIS!

So, about the only thing right was that is worked.  I disassembled as many pieces as I could.  I found that spraying each individual piece created a more professional look instead of taking a can of spray paint to the whole fixture.  The screws were stuck in pieces of styrofoam for spraying. I wiped down each piece to remove the last 25 years of dust off.  I did not sand or prime before I sprayed the metal areas. 

Notice the gold detail on the blades?  Major yuck!  I simply sanded the surfaces to remove any finishes and stained with Minwax Dark Walnut stain.  I did flip the blades over so that all shades of gold are now on the top side.  

The only money I spent on the project was the new glass shades that ran $7 each.  I have since found a place to buy them cheaper.  This project didn't go without it's excitement though.  Upon re-hanging the fixture and flipping the breaker, something went "POP" and I might have seen a bit of smoke.  My husband suggested that maybe I shouldn't be doing electrical work in out home.  It's not stopped me yet.

Buffet...Now Entertainment Center

There is a large wall in our living room that was calling for a big piece of furniture to fill it up.  I was considering using the buffet but knew it would not be large enough.  I decided I'd find a hutch top to use.  I didn't know what I was looking for, but knew this was it when I stumbled upon it a few days later.

We purchased this at an antique store just down the road from us.  I can imagine that it was a beautiful piece in it's day.

After purchasing the hutch I wasn't sure if I was ready to commit.  After a few hours and exchanged photos with my sisters, I was reassured I needed to do this.

We started by removing the tracks for the drawers to create shelving. Wood was cut to provide support for the electronics on the shelves. Then it was all stained with Minwax Dark Walnut with a cherry shade that was left by the previous home owners.  It was a GREAT match! We also went as far as drilling round holes for cords and purchased plastic caps to protect the wood.  Let me tell you, that was the hardest part of the project.  I hated drilling a 1 inch hole into the back of that beautiful hutch!  There is even a fan installed int he back of the buffet to allow air flow.

The buffet received new coat of paint in a softer hue.  This color was carried on to the outside of the hutch.  It is so functional and perfect for the space.  We did save the drawers and tracks, JUST IN CASE!

Estate Sale Find

My husband and I enjoy frequenting sales. At one of the first sales we went to after we were married, he spotted this beauty! The finish was rough, uh..shot! But she was strong and sturdy.

After sanding, I gave it one coat of Kilz and two coats of Ace Cabinet, Door, and Trim Paint. Because I knew this piece would receive alot of use I wanted a finish that would stay perfect.

Working on this piece really got me hooked renovating furniture! I loved seeing how something so ugly could go through so many transformations.

This buffet was used for awhile then it went through another transformation. Check out my next post to see it's new and improved use!